Orange Pi Plus2
Orange Pi Plus 2
It is
raining Allwinner H3 boards by Shenzhen Xunlong and each new version is
bringing something new to help users challenge their potential and creativity.
The Orange Pi Plus 2 is a slight variation of the Orange Pi Plus. The
board occupies slightly larger area. The SDRAM comes with an additional GB
(from 1GB to 2GB).
Orange Pi Plus 2 Specifications
·
Cortex-A7
CPU H3 Quad-Core (H.265/HEVC 4K)
·
Supported by 600MHz GPU (Mali400MP2)
·
The GPU is configured to support
OpenGL ES 2.0
·
2GB DDR3 (SDRAM)
·
The onboard storage features include
the support for TF card up to 32GB, EMMC 16GB Flash, MMC Card Slot (2.5 SATA
Disk 2T maximum)
·
Features 10/100/1000M Onboard
Ethernet RJ45
·
802.11 b/g/n Onboard RTL8189ETV
·
Camera sensor CSI video input support
·
SM pixel camera sensor support for
video input
·
PAL protocol/NTSC protocol CCIR656
video input support
·
Sensor interface video input support
for CMOS 8-bit YUV422
·
Compatible with a maximum 1080p
resolution video input at 30 frames a second
·
Support MIC for audio input
·
HDMI/HDCP, HDMI 30-function, HDMI
CEC, Integrated CVBS, HDMI CEC, and CVBS/HDMI (simultaneous), all video outputs
are supported by Pi Plus 2
·
For audio output, Pi Plus 2 supports
3.5mm Jack in addition to the HDMI
·
Accepts DC input power supply
·
4 x 2.0 HOST USB
·
1 x 2.0 OTG USB
·
Features SW4, SW3 and SW2, Power button,
Recovery button and Uboot button respectively
·
Like other Orange Pi boards, Pi Plus
2 is also compatible with the Raspberry Pi B+
·
Ground UART (1x3) pin GPIO
·
Status LED
·
Power LED
·
Input IR Power Key
·
Compatible with Android, Raspbian
Image, Debian and Ubuntu
·
L x W = 108mm x 67mm
·
Weighs 83-grams
Orange Pi Plus 2 Description
Slightly wider than Pi Plus, 4x 2.0 HOST and an added AW3 and SW3, make
the Orange Pi Plus 2 a bit preferable over the previous version. Rest of the OPi Plus 2 features are pretty much the
same as of the OPi Plus.